The
following tables contain the minimum system requirements and
recommended system requirements for supported Windows and Macintosh
operating systems.
Windows system requirements
Supported Windows operating systems
: Windows XP, Windows Vista
NOTE:
For Windows XP SP 1 Starter Edition, and Windows Vista Starter Edition only
the print driver and Toolbox are available.
Component
Minimum system requirement
Recommended system requirement
Processor
Windows XP (32-bit) Service Pack 1
Intel Pentium II or Celeron processor
Intel Pentium III or higher processor
Windows Vista
800 MHz 32-bit (x86) or 64-bit (x64) processor
1 GHz 32-bit (x86) or 64-bit (x64) processor
RAM
Windows XP (32-bit) Service Pack 1
512 MB
512 MB
Windows Vista
512 MB
1 GB
Free disk space
Windows XP (32-bit) Service Pack 1
225 MB
360 MB
Windows Vista
902 MB
1056 MB
Browser
Windows XP (32-bit) Service Pack 1
Microsoft Internet Explorer 6.0 or later
Windows Vista
Microsoft Internet Explorer 7.0
Other
Adobe Acrobat Reader 5.0 or later
Macintosh system requirements
Supported Windows operating systems
: Mac OS X (v.10.4, v.10.5)
To check the cartridge compatibility for your product, go to
HP SureSupply
. To identify your cartridge in a language other than English, click the language link near the globe icon (
) in the upper right corner of your browser.
Input/output
USB port: Rear hi-speed, front PictBridge port for storage devices and optional HP USB Bluetooth adaptor
Memory
card slots: Memory Stick, Memory Stick Pro, Memory Stick Select, Memory
Stick Magic Gate, Memory
Stick Duo or Duo Pro (adapter optional), or Memory Stick Micro (adapter
required), MultiMediaCard (MMC), MMC Plus, Secure MultiMedia Card, MMC
Mobile (RS-MMC; adapter
required), Secure Digital (SD), Secure Digital Mini, Secure Digital
High Capacity (SDHC),
TransFlash MicroSD Card (adapter required), or xD-Picture card
Wireless network: 802.11 supported
Bluetooth wireless printing: Supported (Windows Vista or Windows XP and either the Microsoft Bluetooth®
Protocol Stack or the Widcomm Bluetooth® Protocol Stack required)
*Output
tray capacity is affected by the type of paper and the amount of ink
you are using.
HP recommends emptying the output tray frequently. FAST DRAFT print
quality mode
requires the extender tray to be extended and the end tray rotated up.
Without the end tray rotated up, both letter and legal-sized paper will
fall on the first sheet.
Paper sizes
The following table contains lists of supported paper sizes.
Paper Type
Size
Letter
216 x 279 mm (8.5 x 11 inches)
Legal
216 x 356 mm (8.5 x 14 inches)
A4
210 x 297 mm (8.3 x 11.7 inches)
HV
101 x 180 mm (3.98 x 7.09 inches)
Photo card with tab
100 x 200 mm (3.9 x 7.9 inches)
B7 (JIS)
91 x 128 mm (3.6 x 5 inches)
B7 (ISO)
88 x 125 mm (3.5 x 4.9 inches)
Photo paper
varies - see photo paper specifications
Paper types
The following table contains lists of supported paper types.
Paper Type
Dimension
Specification
Supported envelopes
#10
Up to 15 envelopes
Supported transparencies
Up to 40 sheets
n/a
Supported labels
Letter: 216 x 279 mm (8.5 x 11 inches)
Up to 25 sheets
Photo Paper
The following tables contain information on supported photo paper
Recommended operating temperature range: 15 ºC to 32 ºC (59 ºF to 90 ºF)
Humidity: 15% to 80% RH non-condensing
Maximum operating conditions
Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)
Storage conditions
Temperature range: –40 ºC to 60 ºC (–40 ºF to 140 ºF)
Energy Star
This
product is designed to reduce power consumption and save natural
resources without compromising product performance. It has been
designed to reduce total energy consumption both during operation and
when the device is not active. This product qualifies for ENERGY STAR®,
which is a voluntary program established to encourage the development
of energy-efficient office products.
Figure 2: Energy Star logo
ENERGY
STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY
STAR partner, HP has determined that this product meets ENERGY STAR
guidelines for energy efficiency.
This
product is suited for the use of recycled paper according to DIN 19309
and EN 12281:2002. Plastic parts over 25 grams (0.88 ounces) are marked
according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.
Recycling program
HP
offers an increasing number of product return and recycling programs in
many countries and regions,
and partners with some of the largest electronic recycling centers
throughout the world. HP
conserves resources by reselling some of its most popular products. For
more information about the recycling of HP products, go to www.hp.com/hpinfo/globalcitizenship/environment/recycle/
(in English).
Regulatory specifications
The product requirements from regulatory agencies in your country/region. For
a complete listing of regulatory notices, see the onscreen Help.
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-0824. This regulatory number should not be
confused with the marketing name (HP Photosmart C6300 All-in-One series, etc.) or product
numbers (CDO20A, etc.).
Exposure to radio frequency radiation
The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. This
product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In
order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.